Allied Vision Alvium Series - Operating and Storage Conditions

16
Use of heavy lenses, shock and vibration
For non-static applications, use lenses with a mass less than 70 g and a length
less than 38 mm, where center of gravity is 20 mm, measured from the lens
mount front flange. For heavier or longer lenses, use a lens support and apply
additional tests. For more information, please contact
support@alliedvision.com.
Cameras were successfully tested according to the following standards:
• IEC 60068-2-6, sinusoidal vibration testing
• IEC 60068-2-27, non-repetitive shock testing
• IEC 60068-2-27, repetitive shock testing
• IEC 60068-2-64, random vibration testing.
Operating and storage conditions
Environmental conditions Value
Operation, housing temperature (heat sink required) +5 °C to +65 °C
Storage, ambient temperature -10 °C to +70 °C
Relative humidity, non-condensing 20% to 80%