17
Setting up the camera for operation
Alvium CSI-2 cameras do not provide plug & play support. This section includes
general information to help with camera setup.
Mounting the camera
Tripod adapter
See the Alvium Cameras Accessory Guide at
https://www.alliedvision.com
> Support > Technical Documentation > Alvium CSI-2 cameras
Housed cameras: top and bottom mounting
• Attach the camera with suitable M3
screws at 0.35 Nm maximum torque for a
thread engagement of 2 mm between
screws and mounting threads.
① = Mounting thread M3 -2↓
To Next Page
Loading...
