14
GPIOs
To avoid damage to the camera, keep maximum input voltage less than 5.5 VDC
and maximum current less than 12 mA per output. The maximum length for I/O
cables must not exceed 30 m.
Ground loops
Unsuitable connections can lead to different potentials between the camera
system GND and the environmental shield/chassis GND caused by ground loops.
This can damage the camera and the connected devices or cause malfunctions.
• Avoid potential differences between the camera housing and GND.
• All wiring must be done by authorized personnel, according to the
corresponding technical standards.
• Read the description in the user guide carefully.
Camera mounting
Housed cameras must be mounted using the mounting threads.
To Next Page
Loading...
