7
Specifications - 495 & S495 Loader
Model number: 495
Mounting height: 36" (nominal)
Typical range: 33" - 39"
Description Bucket Lift
Bore 2.50" 2.50"
Rod 1.50" 1.50"
Stroke 20.63" 20.63"
A - Maximum lift height to pivot point (full height): 130" (11.0')
B - Clearance with bucket dumped: 100.4" (8.4')
C - Reach at maximum height: 28.2"
D - Maximum dump angle: 38°
F - Bucket rollback angle: 23.4°
G - Digging depth: 5.5"
H - Overall height in carry position: 70.7" (5.9')
R - Rollback angle at full height: 102.1°
Calculated breakout force: 2500 lbs with 2.5" lift cylinders
Calculated lift capacity: 2075 lbs with 2.5" lift cylinders
Notes:
1 - Calculated values assume 2500 psi lift cylinder pressure
2 - Breakout force estimated as per ASAE S301.2 - 4.1.2 (net payloud applied at cutting edge)
3 - Lift capacity estimated a per ASAE S301.2 - 4.1.1 (net payload applied at bucket midpoint)
4 - Average bucket weight (72"): 450 lbs
5 - Optional 3" lift cylinders available
6 - Short models breakout approx. 10% more than corresponding reg. models
To Next Page
Loading...