Allis-Chalmers 400 Series - Users Responsibility

User's Responsibility
USER'S RESPOIMSIBILITY
It is the responsibility of the user to read the Operator’s Manual and understand the safe and
correct operating procedure as pertains to the operation of the product, and to lubricate and
maintain the product according to the maintenance schedule in the Operator’s Manual.
The user is responsible for inspecting his machine, and for having parts repaired or replaced
when continued use of the product would cause damage or excessive wear to other parts.
It is the user’s responsibility to deliver his machine to the Allis-Chalmers dealer who sold
him the product, for service or replacement of defective parts which are covered by the stand¬
ard warranty.
The user should notify his Selling Dealer in advance so arrangements can be made to have
his 100-hour or 30-day inspection performed. The user should not be charged for this inspec¬
tion or adjustments, but is expected to pay for oil. filters, or any parts and labor which are
not covered by the standard warranty. ■ The user is responsible for bringing the product to the
Selling Dealer’s shop to have this inspection performed.
If the Dealer is requested by the Customer to travel to another location, or haul the machine
to his shop for the purpose of per form ijig a warranty obligation or free inspection, it would be
for the Customer’s convenience, and the cost for such trips is to be paid for by the Customer.
Any arrangement whereby the Dealer agrees to absorb all or a part of the cost of these trips
is to be made between the Dealer and the Customer and is to be considered a courtesy to
the Customer.
Allis-Chalmers does not allow credit for the cost of travel time, mileage, or hauling as a warranty
allowance.
THE ALLIS-CHALMERS BATTERY SERVICE
ADJUSTMENT POLICY AND WARRANTY
ARE SHOWN ON PAGE 32.