Allmand LSC100 - Manual Start Operations; Manual Shutdown Procedure; Automatic Start Operations; Automatic Shutdown Procedure

3
WI-LSC905/3003-02
Manual Start Instructions
1. Turn power switch ON
2. Turn light circuit breakers ON
3. Turn Auto/Manual switch to MANUAL
NOTE:
*Glow plugs are automatic as required
*Engine will start or make 5 attempts
*Lights will come on when engine water temperature reaches 120° F.
Shut Down
Automatic Start Instructions
1. Turn power switch ON
2. Turn light circuit breakers ON
3. Turn Auto/Manual switch to AUTO (Start sequence will begin when
photocell senses preset light value)
NOTE:
*Glow plugs are automatic as required
*Engine will start or make 5 attempts
*Lights will come on when engine water temperature reaches 120° F.
Shut Down
1. Turn Auto/Manual switch OFF
2. Turn power switch OFF
1. Turn Auto/Manual switch OFF
2. Turn power switch OFF
Not for Reproduction