EasyManuals Logo

Allnet ALL0276 User Manual

Allnet ALL0276
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
1
Introduction
Welcome
The ALL0276 VPN Router from ALLNET is an advanced complete wireless networking solution for
small business, education, enterprise or Hotspot requirements.
The ALLNET incorporates four networking functions in a single box.
• The Wireless Access point providing connectivity for 802.11 b/g devices
• Integrated 4 port full duplex 10/100 Switch to connect wired Ethernet devices
Router integrates all functions and lets the whole network share a high-speed
cable or Internet Connection
VPN function creates encrypted “tunnels” through the Internet enabling remote
users to connect from off site or branch offices to a corporate network
The four Ethernet connections provide the ability to connect 4 PCs directly or provide connections to
more hubs and switches to create a network as large as is needed.
Data and privacy are assured as the ALLNET can encrypt all wireless transmission with 128-bit WEP
encryption, and also supports the additional security provided by 802.1x authentication and
authorization.
The ALLNET can serve as a DHCP Server, has NAT technology with a powerful SPI firewall to
protect against Internet intruders, supports VPN pass-through, and can be configured to filter internal
users' access to the Internet. The system has MAC or IP address filtering so you can specify
precisely who has access to your network.
The system is simple to configure with the intuitive web browser-based configuration utility.With a
high-speed internet connection and application software it can easily be deployed as a hotspot
in-a-box.
Understanding ALL0276 VPN Router
The Back Panel
The Router's ports, where a network cable is connected, are located on the back panel.
our modem.
ect to your PC and other network devices.
eset Button There are two ways to Reset the Router's factory defaults. Either press the Reset
Figure 1: Back Panel
Internet The Internet port connects to y
LAN (1-4) The LAN (Local Area Network) ports conn
Power The Power port is where you will connect the power adapter.
R
Button, for approximately ten seconds, or restore the defaults from the Administration tab in the
Router's Web based Utility.

Other manuals for Allnet ALL0276

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allnet ALL0276 and is the answer not in the manual?

Allnet ALL0276 Specifications

General IconGeneral
BrandAllnet
ModelALL0276
CategoryNetwork Router
LanguageEnglish

Related product manuals