Need help?Do you have a question about the Allnet ALL-VPN10 and is the answer not in the manual?
General| Brand | Allnet |
|---|---|
| Model | ALL-VPN10 |
| Category | Network Router |
| Language | English |
Configures connection types (DHCP, PPPoE, Static IP) for WAN ports.
Configures how traffic is distributed across multiple WAN connections.
Assigns specific traffic types or IPs to particular WAN ports.
Configures the device's DHCP server for automatic IP assignment to LAN clients.
Controls network access by linking IP addresses to specific MAC addresses.
Configures authentication modes (WEP, WPA) and access filters for wireless security.
Sets bandwidth limits and priorities for services and IP addresses.
Enables/disables core firewall features like SPI, DoS, and WAN request blocking.
Defines rules to permit or deny network traffic based on IP, port, and protocol.
Configures Quality of Service rules for application-specific bandwidth management.
Guides setting up Gateway-to-Gateway and Client-to-Gateway VPN tunnels.
Sets up a PPTP server for remote access and VPN connections.
Maps internal servers to public IPs for external access.
Guides the process of updating the device's firmware.
Allows backing up and restoring device configuration settings.
Provides options to restart the router or restore factory default settings.
To Next Page
