Allnet ALL-VPN10 - Routing Settings

ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved
143
11.3 Routing
In this chapter we introduce the Dynamic Routing Information Protocol and Static Routing Information
Protocol.
When there are more than one router and IP subnets, the routing mode for the device should be configured as
static routing. Static routing enables different network nodes to seek necessary paths automatically. It also enables
different network nodes to access each other. Click the button “Show Routing Table” (as in the figure) to display the
current routing list.