XIII. Advanced Function
11.1 DMZ Host/ Port Range Forwarding
11.1.1 DMZ Host
When the NAT mode is activated, sometimes users may need to use applications that do not support
virtual IP addresses such as network games. We recommend that users map the device actual WAN IP
addresses directly to the Intranet virtual IP addresses, as follows:
If the “DMZ Host” function is selected, to cancel this function, users must input "0” in the following “DMZ
Private IP”. This function will then be closed.
After the changes are completed, click “Apply” to save the network configuration modification, or click
“Cancel" to leave without making any changes.
11.1.2 Port Range Forwarding
Setting up a Port Forwarding Virtual Host: If the server function (which means the server for an external
service such as WWW, FTP, Mail, etc) is contained in the network, we recommend that users use the firewall
function to set up the host as a virtual host, and then convert the actual IP addresses (the Internet IP addresses)
To Next Page
Loading...
Need help?
General
