VII. Intranet Configuration
This chapter introduces how to configure ports and understand how to configure intranet IP addresses.
7.1 Port Management
Summary:
There are Network Connection Type, Interface, Link Status (Up/Down), Port Activity (Port Enabled), Priority
Setting (High or Normal), Speed Status (10Mbps or 100Mbps), Duplex Status (half duplex or full duplex), Auto Neg.
(Enabled/Disabled).
Statistics:
The packet data of this specific port will be displayed. Data include receive/ transmit packet count, receive/
transmit packet Byte count and error packet count. Users may press the refresh button to update all real-time
messages.