EasyManua.ls Logo

Allnet ALL168250 User Manual

Allnet ALL168250
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ALL168250 QIG
ALLNET GmbH © 2012
www.allnet.de
ALL168250
500 Mbps PLC Ethernet Bridge
QUICK INSTALLATION GUIDE
Question and Answer IconNeed help?

Do you have a question about the Allnet ALL168250 and is the answer not in the manual?

Allnet ALL168250 Specifications

General IconGeneral
TypeWireless Router
ModelALL168250
Antenna TypeExternal
Operating Temperature0°C to 40°C
Humidity10% to 90% non-condensing
Wireless StandardsIEEE 802.11b
Ethernet Ports4
Security FeaturesWPA, WPA2

Summary

Preface

Important Safety Instructions

Before You Begin Installation

PC Hardware Requirements

Specifies the minimum PC hardware and operating system requirements for installation.

PC Network Configuration Restrictions

Details network configurations that must not be present on the PC for proper operation.

Network Installation Steps

Outlines the two primary steps required for installing the PLC Ethernet Bridge.

Required Components Checklist

Lists the essential parts needed for each PC during the network setup.

Powerline Device Connections

Explains how to connect the Powerline device using its single Ethernet port.

PLC Device Limitations

Describes the distance limitations and intended use for the PLC device.

Product Installation Guide

PC Local Powerline Network Installation

Step-by-step instructions for setting up the device in a local PC network.

Sharing Internet Access (Modem/Router)

Guide for connecting the device to share internet access from a modem or router.

Wireless AP Extender Setup

Instructions on how to configure the device as a wireless Access Point Extender.

Specification

LEDs and Push Button Usage

CE Declaration of Conformity

Related product manuals