EasyManuals Logo

Alloy SmartHome AH-HUB3 User Manual

Alloy SmartHome AH-HUB3
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
The Hub rapidly cycles through green, orange and red (0.5 secs per color) until identification is
stopped, also via the Indicator Set command.
SmartStart™
Z-Wave SmartStart automates the secure addition of devices to the Z-Wave network controlled
by the Alloy SmartHome Hub.
By giving the Hub a list of provisioned devices, you are instructing it to automatically add
matching devices to the Z-Wave network, if not already added, whenever they are detected by
the Hub. Only one device can possibly match a given SmartStart provisioning.
A device is provisioned first clicking on the "Add provisioning" button and then editing the details
of its provisioning. This is done by entering its 40-digit secure device key (SDK), accompanied
by a meaningful name. Note that the SDK is composed of eight 5-digit numbers separated by
dashes. When done, press on the "Set" button.
© 2020 Alloy SmartHome LLC All Rights Reserved 18

Other manuals for Alloy SmartHome AH-HUB3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alloy SmartHome AH-HUB3 and is the answer not in the manual?

Alloy SmartHome AH-HUB3 Specifications

General IconGeneral
BrandAlloy
ModelSmartHome AH-HUB3
CategorySwitch
LanguageEnglish

Related product manuals