Need help?Do you have a question about the AllPondSolutions PF-12000 and is the answer not in the manual?
Vital to inspect and lubricate O-rings regularly to prevent leaks as the seal can perish over time.
Monthly cleaning of pipes, impeller, and filter media is recommended for optimal performance and to prevent blockages.
Filter media like foams and bio-balls are designed for optimum filtration. Clean in pond water, replace <50% at once.
The unit's head can be removed by unfastening the head clasp on the side of the filter body.
Clean media and foam by untwisting the plate holder anti-clockwise. Rinse in pond water to protect beneficial bacteria.
Remove the top part of the filter, rotate ballast clockwise, and gently lift the UV bulb for cleaning/replacement.
Troubleshooting steps for when the UV indicator on the filter lid is not operational, checking power and bulb.
Steps to resolve slow flow rate, including checking foams for debris, hose connection size, and kinks.
Addresses green pond water when UV is working, suggesting water tests, treatments, or pond shading.
Solutions for cloudy/brown water including unit operation, waste removal, water changes, and reducing feeding.
General| Maximum Head Height | 3.5m |
|---|---|
| Voltage | 220-240V |
| Frequency | 50 Hz |
| Cable Length | 10 m |
| Flow Rate | 12000 L/H |
| Max Pond Size | 12000 L |
| Maximum Flow Rate | 12, 000 L/h |
| Hose Diameter | 32 mm |
To Next Page
