Need help?Do you have a question about the AllPondSolutions PF-8000 and is the answer not in the manual?
General| Model | PF-8000 |
|---|---|
| Flow Rate | 8000 L/h |
| Max Head | 2.5 m |
| Power Consumption | 80 W |
| Voltage | 220-240V |
| Frequency | 50 Hz |
| Inlet Hose Tail | 32 mm |
| Outlet | 32 mm |
| Hose Diameter | 32 mm |
Essential safety guidelines for operating and maintaining the pond filter to prevent damage or injury.
Details on power supply, earthing, RCD, and cable safety for the pond filter.
Factors for optimal placement, including distance from pond and potential for burying.
Step-by-step instructions for setting up and beginning to use the pond filter system.
Proper procedures for operating the UV clarifier, including safety checks.
Recommended schedule for cleaning and inspecting filter components for optimal performance.
Details on cleaning filter media and maintaining O-rings for leak prevention.
Steps for periodic cleaning of filter components and checking indicators.
Instructions for safely replacing the UV bulb and recommended replacement intervals.
Visual identification of all components within the pond filter system.
Key technical details including model, UV power, flow rate, and dimensions.
Steps to diagnose and resolve issues where the UV indicator light is not functioning.
Guidance on identifying and fixing problems causing reduced water flow through the filter.
Diagnosing and addressing issues related to green, cloudy, or brown pond water.
Solutions for leaks and the unit shutting off unexpectedly during operation.
Details on the warranty period, what is covered, and conditions that may void the warranty.
To Next Page
