I am having
trouble
lighting a fire
in my stove.
OR
Fire is not
burning very
well
• Poor quality Fuel
• Unseasoned logs
• Logs are too big
• Insufficient air
• Insufficient draw on
chimney
• Use recommended fuel
• When starting the fire, use small, very dry kindling.
• Use eco logs, kiln dried logs
• Open the air control to allow more air into stove
• Vacuum out any ash which may have fallen down the side
of the ash pan
• Get chimney swept to ensure nothing is obstructing the
flue.
My fire is
burning too
quickly
• Too much draft
• Excessive draw
on chimney
• Poor quality fuel
• Fire rope has
become loose
• Close down the air control to reduce air intake
• Look at installing an appropriate cowl to reduce chimney
draw
• Ensure quality fuel is used as opposed to soft wood and
off cuts of timber.
• Check the fire rope seal around door and ensure it is fitted
tightly.
• Insufficient draft
• Down draft
• Poor ventilation
• Ensure chimney flue is not blocked. Should be swept if
there is any doubt.
• Install anti down draught cowl
• Ensure there is sufficient ventilation in room to feed the
fire.
Lower than
expected
heat output
• Use the recommended fuel for the stove of less than
<20% moisture.
To Previous Page