Need help?Do you have a question about the Allsteel Access and is the answer not in the manual?
General| Brand | Allsteel |
|---|---|
| Model | Access |
| Category | Indoor Furnishing |
| Language | English |
Move adjustment handles up or down to fit your personal preference. Adjustments on the mesh chair can be made independently for the right and left sides.
Push the arm trigger to adjust the height, and release to lock. Push or pull armpad forward/backward for depth, or in/out for pivot.
Pull knob out and turn counterclockwise to lock tilt. Lean back to activate. Turn clockwise and lean back to unlock.
Lift and hold the lever as you push the seat forward and backward.
Push down on lever and adjust arm to desired width, then pull lever back up to locked position.
To raise seat, lift weight off and pull lever up. To lower, lift lever while seated.
Pull knob out and turn clockwise to increase tension, counterclockwise to reduce tension.
Lift up on seat back to adjust to one of six preset positions or release to lowest position.
Push lever in while seat and back are upright to lock. Pull lever out to unlock.
Turn knob counterclockwise to decrease tension, clockwise to increase tension.
Periodically inspect mechanisms for loose, broken, or missing parts. Remove chair from use until repairs are made using factory-authorized parts.
Find out more about Allsteel products at allsteeloffice.com.
To Next Page
