SECTION CONTENTS PAGE
Part I (Service and maintenance)
1 Introduction 3
2 Warning notes 4
3 Warning signs 5
4 Operating principles 6
4.1 Weighing 6
4.2 Chopping/mixing 6
4.3 Feeding out 7
4.4 Maintenance 7
4.5 Safety precautions 8
5 Safety 8
6 Weighing system 11
7 Operation 12
7.1 Set-up ` 12
7.2 Hitch height adjustment 14
7.3 Diet feeder capacity 17
7.4 Loading and mixing 18
7.5 Operating the KEENAN MechFiber diet feeder 19
7.6 Operating the KEENAN MechFiber bale handler 20
7.7 Specific instructions for bale handler models 21
7.8 Washing and chopping root crops 22
7.9 Feeding out 22
8 Maintenance 23
8.1 Chains 23
8.2 Chain tensioning 25
8.3 Greasing 27
8.4 Blade maintenance 31
8.5 Maintenance for bale handler models 31
8.6 Shear bolts 32
8.7 Nuts and bolts 33
8.8 Tyres 34
8.9 Wheels 34
8.10 Rear feed-out elevator (where fitted) 35
8.11 Side and stub elevator (where fitted) 35
9 Maintenance checklist 37
10 Specifications 38
Part II (Spare parts)
11 Parts list 39
11.1 Hydraulic system 39
11.2 Chassis parts 40
11.3 Front cover parts 41
11.4 Standard feed-out tray parts 43
11.5 Fold-down tray parts 45
11.6 Rear Panel Parts 48
11.7 Weighing system parts 52
11.8 Auger chamber/VFC-door parts 53
11.9 Rotor parts 56
11.10 Auger parts 57
11.11 Inner body parts 58
11.12 Drivel system parts 59
11.13 Bale handler parts 64
11.14 Axle options 70
11.15 Ancillary parts 72
12 Troubleshooting 73
12.1 General troubleshooting 73
12.2 Weighing troubleshooting 76
13 Warranty 77
14 E.C. Declaration of conformity/CE certification 78
15 Contact details 79
To Next Page
Loading...
