Function Options
Allows administrator to unlock and open each
compartment without user’s own code.
Door Unlock Only
This function is usually in use when users forget the
personal code they had set. This function allows
administrator to unlock the door and clear the code
which was set by the user.
Door Unlock and Code Clearing
Inspection Password is mainly used for Door Unlock Only function and starts with the default
password setting before you change it. Administrators are allowed to set their own Inspection
Password, but if the password is forgotten, you will need to reset all your passwords back to
the default setting. (See what to do if you forget INSPECTION/RESET Password)
Inspection Password Setting
(Max.: 8 Digits)
Reset Password is mainly used for Door Unlock and Code Clearing function and starts with
the default password setting before you change it. Administrators are allowed to set their own
Reset Password, but if the password is forgotten, you will need to reset all your passwords
back to the default setting. (See what to do if you forgot INSPECTION/RESET Password)
Reset Password Setting
(Max.: 8 Digits)
13
To Next Page
Loading...