Need help?Do you have a question about the Alpha Fan AX828-3B/56 and is the answer not in the manual?
Important safety instructions for installation and maintenance personnel.
Critical points to note during installation and operation to prevent hazards.
Assemble canopy, canopy cover, and coupling cover through the downrod.
Route wires and fix downrod to coupling, ensuring firm tightening.
Attach rubber pulley to ceiling hook and secure with bolt, pin, nut, and washer.
Remove safety wire screw and spring washer from the downrod.
Tie the safety wire across the hook as shown in the diagram.
Screw the safety wire firmly with spring washer onto the downrod.
Connect fan wires to the house's supply wire, matching colors and terminals.
Align blade holder, blade, and panel, then screw them together.
Mount blade holder to motor and screw with provided hardware.
Connect wiring and attach the switch housing to the fitter plate.
Adjust fan speed from lowest to highest settings for comfort.
Set timer for auto activation and simulate natural breeze effect.
Stores and recalls the last fan settings upon power on.
Guidelines for cleaning the fan using mild soap and water, avoiding solvents.
General| Model | AX828-3B/56 |
|---|---|
| Category | Fan |
| Fan Size | 56 inches |
| Number of Blades | 3 |
| Motor Type | AC Motor |
| Speed Settings | 3 |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Warranty | 1 Year |
| Power Consumption | 75 Watts |
| Material | Metal |
| Color | Black |
To Next Page
