Alpha Fan Motto WF 360/8-AC

Need help?

Do you have a question about the Alpha Fan Motto WF 360/8-AC and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Safety Precautions
Customer Service Centre

This document is an instruction manual for the ALPHA Fan WALL FAN, Model: Motto WF 360/8-AC, Version: 2019 V1. It provides essential information regarding safety precautions, parts and accessories, control panel functions, remote control functions, operation, installation, maintenance, technical specifications, and customer service.

Function Description

The ALPHA Fan Motto WF 360/8-AC is a wall-mounted fan designed to provide air circulation. It features multiple speed settings, different operation modes (Normal, Natural, Sleep), a timer function, and a 360° oscillation capability for wide air distribution. The fan can be controlled via a control panel on the unit or a remote control. Its primary function is to cool and circulate air in indoor environments.

Important Technical Specifications

Model: Motto WF 360/8-AC
Voltage: 220V-240V ~ 50/60Hz
Wattage: 42W

Usage Features

The fan offers a variety of usage features to enhance user comfort and convenience:

Control Panel & Indicator Lights:
- Timer: Allows setting the fan to turn off after 1h, 2h, or 4h. The timer can be set from 1H up to 7H (1H → 2H → 3H → 4H → 5H → 6H → 7H).
- Mode: Selects between Normal, Natural, and Sleep modes.
  - Normal: Offers three speed controls (High, Medium, Low).
  - Natural: Fan speed changes within its range to simulate a gentle sea-breeze effect.
  - Sleep: Gradually reduces the fan speed in intervals of 30 minutes for comfortable sleep.
- Speed: Adjusts the fan speed from 1 to 3.
- 360° Oscillation: Activates or deactivates the 360° rotation of the fan head.
- Function Mode Control: Button to cycle through the different operation modes.
- Remote Receiver: An infrared receiver for the remote control signals.
- Fan On/Off & Speed Control: A single button to turn the fan on/off and cycle through speeds (On → Speed 1 → Speed 2 → Speed 3 → Off).
- Oscillation Control: A dedicated button (labeled 360) to control the 360° oscillation.
Remote Control Function:
- On/Off: Powers the fan on or off.
- Oscillation: Activates or deactivates 360° oscillation.
- Speed (Decrease): Reduces the fan speed.
- Speed (Increase): Increases the fan speed.
- Function Mode: Cycles through Normal, Natural, and Sleep modes.
- Timer: Sets the timer for automatic shutdown.
- Battery: Uses a CR2025 3V battery.
Operation:
- 360° Oscillation: Press the (360) button on the control panel or remote to activate 360° oscillation. Press it again to stop.
- Adjusting Air Direction (Manually): The fan's air direction can be manually adjusted upward or downward by pressing the front body of the fan. It offers distinct angles (0°, 45°, 90°) and produces a "Dak" sound when each angle is adjusted, indicating it has locked into position.
Installation Guide:
- Installing the Wall Bracket:
  1. Decide the desired location for installation.
  2. Mark the mounting points on the wall using the wall bracket as a guide.
  3. Drill holes for the screws (4 Nos).
- Installing the Fan:
  1. Hook the fan body onto the wall bracket through the groove on the bottom plate.
- Warning: Consult qualified personnel if installation is difficult. Ensure the fan is installed on a reliable and fixed wall before use.

Maintenance Features

Regular maintenance is crucial for the fan's longevity and performance.

Important: Always unplug the fan from the supply socket before performing any maintenance work.
Cleaning:
1. Use only lukewarm water and mild detergent for cleaning. Avoid corrosive or acidic solutions.
2. Clean the fan with a soft or lint-free cloth to prevent scratching the surface.
3. To clean between the guards, use tools like a pipe cleaner, flexible dust wand, vacuum cleaner, or compressed air to gently remove dust.
4. Crucially, DO NOT wet or immerse the motor, switch, power cord, and plug in water.

Safety Precautions

The manual emphasizes several safety precautions:

Unplug the power cord during installation, cleaning, or relocation.
Do not modify the length of the power cord.
Do not use the fan if the power cord or plug is damaged, or if the power socket is loose.
Repairing/servicing must be done by authorized and qualified electricians.
A damaged power cord must be replaced by the manufacturer or service agent to avoid hazards.
Do not touch the fan or plug with wet hands.
Do not expose the fan to dripping or splashing water, or place objects filled with water (e.g., vases) on it.
Avoid using the fan near gas stoves, fire sources, unusually humid or high-temperature areas, oily soot, or in outdoor environments. Keep objects that may be drawn into the fan (e.g., drapes, curtains) away.
Do not insert hands or fingers into the front grille or movable parts.
Place the fan on a stable and level surface.
This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person. Children should be supervised to ensure they do not play with the appliance.

Warning: This appliance is designed to use only supplied or designated parts and accessories. Using unauthorized parts may result in personal injury or property damage.

Customer Service Centre

The manual provides contact information for customer service centers in Malaysia (Head Office, Johor, Melaka, Perak, Penang, Pahang) and Singapore, including telephone numbers, fax numbers, websites, and email addresses for technical assistance or faulty reports.