Alpha-InnoTec LUXTRONIK Hybrox 8 User Manual

www.alpha-innotec.com
UK
Heating- and heat pump control
Part 2
83055400kUK – 2.1
OPERATING MANUAL
LUXTRONIK
Scope of delivery, Montage,
Electrical connections,
Installation of sensors, Dismantling
Software update
Switching on / Commissioning
Program area “Cooling“
Program area “Service“
Program area “Parallel mode“
Appendix

Alpha-InnoTec LUXTRONIK Hybrox 8 Specifications

General

Compatibility	Alpha-InnoTec heat pumps
Communication	CAN bus
Functionality	System control and monitoring
Display	LCD
Power Supply	230V

Summary

Manual Overview and Safety

Please Read First

Important safety and handling instructions for the operating manual.

Installation and Components

Montage and Assembly

Instructions for installing the control unit and wall-mounted controller.

Electrical Connections

Guidance on connecting the control unit to the power supply and system.

Commissioning and Basic Operation

Switching On and Commissioning

Initial startup procedure including self-test and language selection.

Startup Guide and Parameter Fixation

Assisted setup process and saving initial configuration parameters.

Emergency Mode Operation

Functionality and activation of the emergency mode for system operation.

Remote Maintenance Setup

Enabling and checking remote maintenance connectivity.

Settings and System Configuration

Determining Temperatures and System Settings

Setting operational temperatures and configuring system parameters.

Smart Functions and Smart Grid

Configuration and operation of Smart functions and Smart Grid integration.

Troubleshooting and Technical Data

Error Diagnosis and Messages

Identifying and resolving error codes and system faults.

System Setting During Commissioning

Overview of adjustable parameters during initial system setup.