To Next PageTo Next PageHow to fix Alpha Moisture Systems SADPmini2 when it does not turn on?
If your Alpha Moisture Systems Measuring Instruments unit doesn't turn on, and the screen remains blank, it might be due to a low battery level. Connect the provided power supply unit and charge it for a minimum of 12 hours to achieve a full charge.
What to do if Alpha Moisture Systems Measuring Instruments will not dry down to lower limit?
If your Alpha Moisture Systems Measuring Instruments won't dry down to the lower limit, it could be due to a wet desiccant sieve or a sealing ‘O’ ring failure. Perform service on the unit using the Service Kit.
General| Enclosure Rating | IP66 |
|---|---|
| Dimensions | 150 mm x 80 mm x 40 mm |
| Accuracy | ±2°C |
| Operating Temperature | -20 °C to +50 °C (-4 °F to +122 °F) |
| Display | LCD |
| Temperature Range | -20 °C to +50 °C (-4 °F to +122 °F) |
| Temperature Accuracy | ±0.5°C |
| Output | 4-20mA |
