How to fix Alpha Moisture Systems SADPmini2 when it does not turn on?
If your Alpha Moisture Systems Measuring Instruments unit doesn't turn on, and the screen remains blank, it might be due to a low battery level. Connect the provided power supply unit and charge it for a minimum of 12 hours to achieve a full charge.
What to do if Alpha Moisture Systems Measuring Instruments will not dry down to lower limit?
If your Alpha Moisture Systems Measuring Instruments won't dry down to the lower limit, it could be due to a wet desiccant sieve or a sealing ‘O’ ring failure. Perform service on the unit using the Service Kit.
Why Alpha Moisture Systems SADPmini2 Measuring Instruments fails to connect PC on USB Channel?
If your Alpha Moisture Systems Measuring Instruments fails to connect to a PC on the USB Channel, the cable might be damaged or too long. Try changing the cable.
What to do if Alpha Moisture Systems SADPmini2 Measuring Instruments fails AutoCal?
If your Alpha Moisture Systems Measuring Instruments fails AutoCal and displays a Sensor Open Circuit Error, or the instrument indicates a lower limit, it may be due to an internal wiring fault. Perform AutoCal again, ensuring that the desiccant head is fully extended.
General| Enclosure Rating | IP66 |
|---|---|
| Dimensions | 150 mm x 80 mm x 40 mm |
| Accuracy | ±2°C |
| Operating Temperature | -20 °C to +50 °C (-4 °F to +122 °F) |
| Display | LCD |
| Temperature Range | -20 °C to +50 °C (-4 °F to +122 °F) |
| Temperature Accuracy | ±0.5°C |
| Output | 4-20mA |
To Next Page
