2.2 Battery Information
The SADPmini2 uses a single lithium-ion battery (3.65 V nominal). The battery cannot
be removed or replaced by the user. The instrument must be returned to an
authorised agent for battery replacement. When the battery charge is low and/ or the
battery is charging, the instrument display will be dimmed. If the battery is very low
and the user tries to turn the instrument on, a battery low icon will be displayed and
the instrument will shut down.
Do not replace the battery. Only authorised agents should replace the battery.
Do not open, crush, expose to heat above 50 °C or incinerate the battery. There is a
risk of fire and burns.
Only use the USB charging equipment supplied with the SADPmini2
2.3 Cleaning and Decontamination
The instrument must only be cleaned with a soft cloth dampened with water.
Do not use solvents, silicones or abrasives to clean the SADPmini2
2.4 Information Screens
The SADPmini2 Information screens provide various instrument specification,
manufacturer and authorised agent details. Information screens are for reference
purposes only and do not provide any instrument functionality. To view the available
Information Screens:
1. Select the Information icon ① from the Navigation Carousel to display the
Information screen ②.
2. Using the navigation key ③ scroll through the screens ④ & ⑤ as required.
To Next Page
Loading...
Need help?
General
