What to do if my Alpha-nav Car Navigation system won't power on?
If your Alpha-nav Car Navigation system fails to power on, there could be several reasons. It might be due to a blown radio fuse or car battery fuse, in which case you should install a new fuse with the correct rating. Alternatively, an illegal operation might have occurred; if so, press the RESET button located in the top left corner of the front panel.
Why is there no audio output from my Alpha-nav AN5650NV Car Navigation system?
If you're experiencing no or low audio output from your Alpha-nav Car Navigation system, several factors could be responsible. Check the wiring connections and correct if improper. Ensure the volume isn't set too low, and increase it if necessary. Also, inspect the speakers for damage and replace them if needed. If the sound is only coming from the left or right speakers, check the balance control and set it to the center position. Verify that the MUTE function is off. Finally, check speaker wires and insulate all wiring connections if they are shorted to metal in the vehicle.
What to do if my Alpha-nav AN5650NV disc does not play back?
If your Alpha-nav Car Navigation system disc does not play back, it could be due to several reasons. The disc might be warped or scratched, so use a disc in good condition. It could also be dirty or wet, so clean it with a soft cloth. If the disc rating exceeds the Parental Lock rating limit, change the Parental Lock settings to a lower restriction. The disc region code might not be compatible with the unit, so use a disc with the proper region code. Finally, ensure the disc is inserted with the label side up.
General| Brand | Alpha-nav |
|---|---|
| Model | AN5650NV |
| Category | Car Navigation system |
| Language | English |
To Next Page
