Alpha tools 20497503 User Manual (English)

Questions and Answers:

L
Lori BlackAug 11, 2025
What to do if the display doesn’t appear on the LCD of my Alpha tools Measuring Instruments?
- P
  Pamela MunozAug 11, 2025
  If there is no display on the LCD of your Alpha tools Measuring Instruments, there could be a couple of reasons: * The battery might be in poor contact. Try removing the battery cover and adjusting the battery. * The battery voltage might be under 1.4V. In this case, replace the battery.
P
Patrick RogersAug 19, 2025
Why is my Alpha tools Measuring Instruments less accurate than specified?
- A
  Andrea TranAug 19, 2025
  If your Alpha tools Measuring Instruments is less accurate than specified (but within +0.1mm), it could be due to dirt in the sensor. To resolve this, remove the slider cover and its assembly, then clean with compressed air (5kg/cm).
V
Vanessa ReyesAug 27, 2025
How to fix the Alpha tools Measuring Instruments when the display doesn’t change when the slider is moved?
- R
  Richard DixonAug 27, 2025
  If the display of your Alpha tools Measuring Instruments isn’t changing when you move the slider, it may be due to an accidental trouble in the circuit. To fix this, take the battery out and re-set it after 30 seconds.
A
Angel NicholsSep 2, 2025
What to do if five digits flash simultaneously on my Alpha tools Measuring Instruments?
- K
  Kirk LeeSep 2, 2025
  If five digits are flashing simultaneously, about once per second, on your Alpha tools Measuring Instruments, it indicates that the battery voltage is lower than 1.45V. Replace the battery to solve this issue.

Alpha tools 20497503 Specifications

General

Brand	Alpha tools
Model	20497503
Category	Measuring Instruments
Language	English

Alpha tools 20497503 User Manual

Table of Contents

Questions and Answers:

Alpha tools 20497503 Specifications