Alpha tools 20497503 - Maintenence Instructions; Battery Replacement

80Art.Nr. 20497503 02/2013 81Art.Nr. 20497503 02/2013
D
18.58
OFF ON
mm/inch
ZERO
mm
18.58
E
OFF ON
mm/inch
ZERO
mm
0.00
D. Depth
Dierential method measurement (Application of zero setting)
 Keep the caliper clean and dry (Liquid can damage the slider).
 Faces should be cleaned gently with cotton fabrics. Never use petrol, acetone
and other organic solutions.
 In order to save power, turn o the unit when caliper is goingto stay idle for so
me time.
 Never apply any electric pressure on any part of the caliper and never use an
electronic pen so not to damage it‘s chip.
Flashing of digits shows a at battery. Take o the battery cover in the direction
shown by the arrow and replace the battery (positive side facing up).
Maintenence instructions:
Battery replacement: