14
Locking and Unlocking Messages
Up to 10 messages can be locked to prevent them from being deleted or
from being replaced when memory is full.
When a message is locked, the m symbol is replaced by the g symbol
indicating the message is locked.
To Lock or Unlock a Message
➊ From the Message-status screen, press H or I to select the message
you want to lock or unlock.
➋ Press K .
➌ Press I to move the cursor to g to lock the message, or h to unlock
the message.
➍ Press K.
To lock or unlock a message while reading it, follow steps 2 through 4
above while the message is displayed.
LOCKING MESSAGES
1029B40Book Page 14 Tuesday, September 2, 1997 10:49 AM
To Next Page
Loading...