When hovering, the drone may turn or move left or move right or move forward or
backward without your control input. To correct this you will need to adjust the trim on
the transmitter.
ADJUSTING THE TRIM
PROBLEM:
When hovering the drone
spins to the RIGHT without
your control input.
CORRECTION:
Click the LEFT TURN TRIM to
the left until the drone stops
spinning to the right.
PROBLEM:
When hovering the drone
spins to the LEFT without your
control input.
CORRECTION:
Click the RIGHT TURN TRIM to
the right until the drone stops
spinning to the left.
PROBLEM:
When hovering the drone
moves FORWARD without
your control input.
CORRECTION:
Click the BACKWARD TRIM
down until the drone stops
moving forward.
PROBLEM:
When hovering the drone
moves BACKWARD without
your control input.
CORRECTION:
Click the FORWARD TRIM up
until the drone stops moving
backward.
PROBLEM:
When hovering the drone
moves to the LEFT without
your control input.
CORRECTION:
Click the MOVE RIGHT TRIM to
the right until the drone stops
moving to the left.
PROBLEM:
When hovering the drone
moves to the RIGHT without
your control input.
CORRECTION:
Click the MOVE LEFT TRIM to
the left until the drone stops
moving to the right.
LEFT TURN /
RIGHT TURN TRIM
MOVE LEFT /
MOVE RIGHT TRIM
THROTTLE TRIM
FORWARD /
BACKWARD TRIM