Slide open the battery cover and install 6
AA Batteries. Please note the polarity.
Replace the battery cover once the
batteries are properly installed.
1.) Place the lower mounting bracket underneath the carrying handle.
2.) Place the video screen assembly on top of the carrying handle so the mounting
brackets surround the carrying handle. Firmly secure the video screen by screwing
in the 4 included screws to the mounting bracket.
3.) Plug the video screen power cord to the power plug on the side of the video
screen and on the back of the remote.
INSTALLING TRANSMITTER BATTERIES
INSTALLING LIVE FEED VIDEO SCREEN
To Next Page
Loading...