Need help?Do you have a question about the Alpha XM3-HP Series and is the answer not in the manual?
General| Battery Capacity | 9 Ah |
|---|---|
| Form Factor | Tower |
| Input Voltage | 230V |
| Output Voltage | 230V |
| Frequency Range | 50/60Hz |
| Typical Recharge Time | 4 hours |
| Communication Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Humidity | 5% to 95% (non-condensing) |
Essential safety measures to follow during operation and maintenance.
Details on how to connect the XM3-HP unit to the power source.
Explains the two-part system for safety ground and earth connection.
Notes on securing the Service Power Inserter (SPI) for proper operation.
Introduces the Alpha XM3-HP Intelligent CableUPS product.
Explains the underlying principles of how the CableUPS operates.
Details the physical components and layout of the XM3-HP CableUPS.
Outlines the general steps for installing the XM3-HP power supply.
Details the steps required to start up and configure the XM3-HP after installation.
Covers the initial start-up and self-test procedures for the unit.
Guides the user on how to navigate and use the Smart Display interface.
Explains the structure and options available within the Smart Display menus.
Describes how to interpret and manage active alarms displayed by the unit.
Safety measures to be observed before and during maintenance tasks.
Outlines procedures for maintaining the power supply system.
Step-by-step guide for performing an emergency shutdown.
Detailed technical specifications for North American models.
Detailed technical specifications for International models.
A visual representation of the system's functional blocks and connections.
To Next Page
