Alpha XM3 User Manual

Total Power Solutions
CableUPS
®
Quick Start Guide
Verify battery voltage, cable color, connection and polarity are correct before proceeding.
WARNING!
1
Battery Connector
2
Battery Breaker
3
Precision Temperature Sensor
(PTS) Connector
4
LRI Connector
5
Smart Display
6
DOCSIS Transponder Battery Sense
Harness Connector
7
RF Connector
8
Tamper Switch Connector
9
Output 1 (Primary) / Output 2 (AlphaDOC)
10
APPs Card
11
Smart AlphaGuard Connector
11
10
1
3
4
8
6
7
9
5
2

Alpha XM3 Specifications

General

Frequency	50/60Hz
Communication Interface	USB
Operating Temperature	0-40°C
Storage Temperature	-15-45°C
Transfer Time	2-6ms
Battery Recharge Time	4-6 hours
Humidity	5-95% non-condensing

Summary

Battery Installation and Wiring Diagram

Threaded Insert Terminals

Details on using threaded insert terminals for connections, including bolt size and torque specifications.

Output Voltage Reconfiguration

DOCSIS Communications Module Setup

Power Module Configuration and Installation

Power Module Installation Procedure

Step-by-step guide for installing and configuring the power module, including wiring and initial checks.

Transponder & AlphaGuard LED Status

Verify DOCSIS Transponder Operation

Guide to verifying Alpha DOCSIS Transponder status using LED indications and communication states.

Verify Smart AlphaGuard Operation

Guide to verifying Smart AlphaGuard status using LED states and their corresponding indications.

XM3 Smart Display COMM Menu Navigation

Instructions on navigating the XM3 Smart Display COMM menu to check parameters like IP and MAC addresses.

Final Verification and Web Access

Local Web Server Access

Procedure for accessing the transponder's local web server via an Ethernet connection and IP address.

Remote Web Server Access

Steps to access the Alpha DOCSIS Transponder's web server remotely from a connected computer.