CONCENTRATE / WAX DECARB
15
Note: For concentrates you will use the silicone sleeve
and glass stir rod. Not needed are the lter basket and
plunger.
When you decarboxylate concentrates, the material will
bubble and rise. Use the supplied glass rod to stir the oil and
help release the air bubbles.
Insert the silicone sleeve into the metal cup. Place your concentrate
inside the sleeve. It is ok if some is stuck to the side of the sleeve it
will melt during the decarb cycle.
Replace the silicone and plastic lids and start the cycle,240F for
45min.
Halfway through the cycle time press the Start / Pause button and
remove the lids. Stir the contents vigorously with the glass rod for 60
seconds or until the bubbles stop forming.
Replace the lids, press Start / Pause again to un-pause the cycle.
Once the cycle is nished stir the contents again for 60 seconds with
the glass rod.
Now the decarboxylation process is complete and the oil is ready to
be mixed in with an infusion base.
01.
02.
03.
04.
05.
06.
To Next Page
Loading...