Need help?Do you have a question about the Alphacom a200 and is the answer not in the manual?
Selects between Pulse and Tone dialling modes for exchanges.
Configures recall mode for TONE or PULSE dialling exchanges.
Sets message waiting function for 4 or 6 wire systems.
Adjusts ringer volume and pitch.
Instructions for connecting the telephone lead to the socket.
How to redial the last number manually dialled.
Procedure for storing telephone numbers in memory.
How to dial numbers stored in memory.
How to insert a pause in dialling sequences.
Switches signalling between Pulse and DTMF (tone).
Prevents the other party from hearing the conversation.
Deactivates speech transmission with a latching button.
Sends a Recall Signal to the exchange when connected to a PBX.
Notes on PBX compatibility and potential issues.
To Next Page
General