EISBAER PRO AURORA Alphacool International GmbH
26
INSTALL EISBAER PRO AURORA
PREPARE CPU COOLER
Remove the protective film on the cooler base:
Use the Fillport outlet if you want to refill the Eisbaer Pro using the supplied fillport.
PREPARE CPU
After you have disassembled your old cooler, first clean the hardware:
• Remove residues of the thermal paste from the CPU.
• Use a cloth or cotton swabs to help. With isopropanol alcohol, you can also remove
dried heat-conducting paste.
• Apply a pea-sized blob of thermal paste to the CPU.
• Spread the paste with the aid of a plastic strip or similar to form an even, thin layer
(< 0.5 mm layer thickness).
To Next Page
Loading...
