To Next PageTo Next PageWhat to do if my AlpicAir AWI-20HW1D Air Conditioner doesn't turn on?
If your AlpicAir Air Conditioner isn't turning on, check the fuse or breaker. Also, verify if there's a power cut or if the unit is properly connected to a power source. Ensure that the wireless remote controller has sufficient battery power and is within the operational range.
Why is my AlpicAir AWI-20HW1D not cooling/heating properly?
If your AlpicAir Air Conditioner isn't cooling or heating well, make sure the temperature setting is appropriate. Check if the air inlet or outlet is blocked. A dirty filter, open window, open door, or heat sources in the room could also be the reason. Also, verify that a low fan speed is not set.
What to do if my AlpicAir AWI-20HW1D remote controller is not working?
If the remote controller for your AlpicAir Air Conditioner isn't working, check for any magnetic or electrical interference near the unit; if present, unplug and reinsert the unit. Ensure the remote is within operating range and not obstructed. Check the batteries and replace them if needed. Also, inspect the remote controller for any damage.
What to do if my AlpicAir Air Conditioner unit can not be started up and keeps breaking off?
If your AlpicAir Air Conditioner unit cannot be started, verify that the power is not cut off and the power plug is not loose. Check if the circuit protection device has tripped. Have professionals check if the voltage is too high or too low. Also, ensure the TIMER is correctly set.
Why is my AlpicAir AWI-20HW1D Air Conditioner FCU leaking water?
Water leakage from your AlpicAir Air Conditioner FCU can occur if the humidity is high, condensate overflows, or the drain hose is loose.
Why is there moisture on my AlpicAir Air Conditioner air outlet?
If your AlpicAir Air Conditioner operates at high humidity for an extended period, moisture may form on the air outlet grill and drip off.
Why does my AlpicAir Air Conditioner emit odours?
Some odours may be emitted from your AlpicAir Air Conditioner FCU because of room smells (such as furniture, tobacco, etc.) that have been taken into the FCU.
What does C5 error mean on AlpicAir AWI-20HW1D Air Conditioner?
Check if the connector jumper contacts properly on your AlpicAir Air Conditioner.
What does F0 error mean on AlpicAir Air Conditioner?
Check if the room temperature sensor is connected properly on your AlpicAir Air Conditioner.
What does F1 error mean on AlpicAir Air Conditioner?
Check if the evaporator temperature is connected properly on your AlpicAir Air Conditioner.
General| Brand | AlpicAir |
|---|---|
| Model | AWI-20HW1D |
| Category | Air Conditioner |
| Language | English |
