Need help?Do you have a question about the Alpine Spas HAWAII 735L and is the answer not in the manual?
General| Control System | Digital |
|---|---|
| Water Capacity | 735 L |
| Number of Jets | 35 |
| Pump | 2 |
| Filtration | Yes |
| Lighting | LED |
| Total Jets | 35 jets |
| Water Volume | 735 Litres |
| Shell Material | Acrylic |
Read and follow all warnings and cautions prior to using the spa.
Risks of drowning, injury from suction fittings, and electrical shock.
Details on various types of suction entrapment risks.
Guidelines for wiring the spa by a certified electrician.
Turn on breaker, check display, open jets, test pumps.
Procedure to test the residual current device for safety.
Steps to turn off power, loosen union, allow air escape, and turn on power.
Details on the initial priming mode, pump priming, and exiting the mode.
How to change and set the desired water temperature using the control panel.
How to set start time and duration for filter cycles.
Indicates a vacuum switch closure, often due to suction blockage.
Explains 'FLOW LOSS' and 'FLOW FAIL' messages.
Explains the 'HTR MAY BE DRY' message.
Explains 'HTR DRY' and 'HTR TOO HOT' messages.
Indicates temperature sensors are not synchronized, requiring service.
Details on sync issues and specific sensor A/B faults.
Explains messages for program memory failure and clock failure.
Explains 'ENFG FAIL' and 'GFCI FAIL' messages.
Explains 'STUK PUMP' and 'HOT FALT' messages.
Explains 'NO COMM' message for panel communication issues.
Step-by-step instructions for draining the spa using the hose bib.
To Next Page