Alpine 5953 - Basic Operation; Initial System Setup; Power Switching; Volume;Treble;Bass;Fader;Balance Controls

5953 |
5953 5953
CONTROLS AND INDICATORS CONTROLS AND INDICATORS OPERATION
YD O@OOOO & OY WW
SEEK O.A.P LOUD DX MONO
A.MEMO PAUSE ONEALL M.LX.
reae
(LO
@ POWER On/Off Button
(2) Audio MODE Select/CLOCK Display Button
(3) Level Adjustment Button (-/R/L)
@) DX (Local/Distance)/SCAN Button
(5) MUTE Button
(6) TUNE/Seek/Auto Memory/ DISPlay Button
@) Level Adjustment Button (+/F/R)
Radio Band Indicator
(9) FM STereo Indicator
(0) Level Indicator
() VOL/TRE/BAS/FAD/BAL Indicators
(2 DISC/TIME/MUSIC Indicators
( Digital Display
—=
(4 FMX/PTM Indicator
(5) P.T.M. (Preferred Track Memory)/FMX Button
CLR (Memory Clear) Button/Indicator
dP A. (All) CLR (Clear) Button /Indicator
Reset Button
—
Preset/Disc Select Buttons (1 through 6)/Indicators
0) MONO (Monaural) Indicator
Qi) M.I.X. (Random Play) Indicator
@2 DX (Distance) Indicator
@3) Repeat ONE/ALL Indicator
@4) LOUDness Indicator
@5) PAUSE Indicator
@6) D.A.P. (Direct Access Preset) Indicator
@?) A. (Auto) MEMOry Indicator
SEEK Tuning Indicator
@9) CD Fast Forward/Music Sensor UP/Tuning UP/Minute Button
80) CD Reverse/Music Sensor DowN/Tuning DowN/Hour Button
Gi) TUNER/BAND Select Button
@2 DISC Play/Pause Button
63) MONO(Monaural)/REPEAT Button
64) D.A.P.(Direct Access Preset)/M.1.X.(Random Play)/LOUDness Button
BASIC OPERATION
Initial System Setup
When operating the 5953 for the very first time after installation of it or replace
ment of the car battery, press the Reset button with a ball-point pen or other
pointed object.
Power Switching
Press the POWER button (1) to turn On the 5953 and the 5952 (the1390 alsc
interconnected). Press this button again to turn the power Off.
Volume/Treble/Bass/Fader/Balance Controls
1. Press repeatedly the MODE/CLOCK button @) until your desired mode indic:
}) lights up in the display. The indicators appear in order of VOL, TRE, BAS
FAD, and BAL each time the MODE/CLOCK button @ is pressed.
2. While the selected indicator is lit, press the Level Adjustment buttons (3) and
to obtain your desired level. Pressing the -/R/L button (8) lowers the level int
volume, treble and bass modes, but increases the level of Rear speakers in t
fade mode and left channel in the balance mode. Pressing the +/F/R button (
raises the level in the volume, treble, bass, front speakers, and right channel
modes.
The unit automatically changes to the Volume mode 5 seconds after your
adjustment is made. The VOL indicator lights up and the Level Adjustment butto
(3) and Z work only for the volume adjustment until you change modes.