19-EN
01GB05CDA105E.fm
ALPINE CDA-105E 68-09359Z81-A (EN)
2
Press or to select the desired song.
3
To pause playback, press / .
Pressing / again will resume playback.
• A song playing on the iPhone/iPod while it is connected to this unit
will continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing or .
• An episode may have several chapters. The chapter can be changed
by pressing or .
Searching for a desired Song
An iPhone/iPod can contain hundreds of songs. By using file tag
information and keeping these songs organised in playlists, this unit’s
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the
PLAYLIST/ARTIST/ALBUM/SONG/PODCAST/GENRE/
COMPOSER/AUDIOBOOK search mode to narrow searches based on
the table below.
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press
/ENT to activate the search selection
mode.
2
Turn t he Rotary encoder to select the Artist search
mode, and then press
/ENT.
PLAYLIST ARTIST ALBUM SONG
PODCAST GENRE COMPOSER AUDIOBOOK
PLAYLIST
3
Turn th e Rotary encoder to select the desired
Artist, and then press
/ENT.
4
Turn th e Rotary encoder to select an album, and
then press
/ENT.
5
Turn th e Rotary encoder to select a song and
press
/ENT.
The selected song is played back.
• After pressing and holding
/ENT for at least 2 seconds while in
each hierarchy (except SONG and AUDIOBOOK hierarchy), all
songs of the selected hierarchy are played back.
• After selecting [ALL] in the search mode with “*”, press and hold
/ENT for at least 2 seconds to play back all songs in the iPhone/
iPod or selected search mode.
• While in the search mode, if you press and hold /ESC for at least
2 seconds, or no operation is performed for 30 seconds, the search
mode is cancelled.
• In the search mode, pressing /ESC will return to the previous
mode.
• When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
• “NO SONG” will be displayed if there is no song in the selected
playlist in the PLAYLIST search mode.
• “NO PODCAST” will be displayed if there is no podcast data in the
iPhone/iPod in the PODCAST search mode.
• “NO AUDIOBOOK” will be displayed if there is no audiobook data
in the iPhone/iPod in the AUDIOBOOK search mode.
• If “iPod name” stored in the iPod is selected in the desired playlist
search mode and
/ENT is pressed, you can search for all songs in
the iPod. Also, if you press and hold
/ENT for at least 2 seconds,
all songs in the iPhone/iPod are played back.
• Depending on the iPhone/iPod, podcast search is not supported.
• If Alphabet Skip Function is activated in the search mode, a search
can be made quickly by Alphabet skip function to find the desired
artist or song, etc. For details, refer to “Alphabet Skip Function” on
page 20.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 20.
• If no operation is performed for 30 seconds during search mode, the
unit will return to normal mode.
Return to the beginning of the current song:
Press .
Fast backward through current song:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward through current song:
Press and hold .
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
PLAYLIST Song — —
ARTIST* Album* Song —
ALBUM* Song — —
SONG — — —
PODCAST Episode — —
GENRE* Artist* Album* Song
COMPOSER* Album* Song —
AUDIOBOOK — — —
01GB00CDA105E.book Page 19 Thursday, November 6, 2008 2:22 PM
To Next Page
Loading...
