Alpine CDA-7939R - Page 6

PY=\ (eel ave|e)i-s aceyali
ae lat=)|
English
Detaching the Front Panel
Press the PWR button to turn off the power.
Press the release button until the front panel
pops out.
Grasp the left side of the front pane! and pull
it out.
Note: To protect the front panel, piace it
in the supplied carrying case.
Attaching the Front Panel
First insert the right side of the front panel
into the main unit by aligning the groove
‘on the front panel with the 2 projections
on the main unit.
Then push the left side of the front panel
until it locks firmly in the main unit and a
click sound is heard.
Note: Before attaching the front panel, make
sure that there is no dirt or dust on the
connector terminals and no foreign
objects between the front panel and
main unit.