To Next PageTo Next Page
Need help?Do you have a question about the Alpine CDA-7941 and is the answer not in the manual?
General| Type | CD Receiver |
|---|---|
| Detachable Face | Yes |
| CD-R/CD-RW Compatible | Yes |
| Preamp Voltage | 4 volts |
| EQ Bands | 5 |
| Channels | 4 |
| CD Player | Yes |
| MP3 Playback | No |
| Remote Control | Yes |
| Signal-to-Noise Ratio | 105 dB |
| DIN Size | 1 DIN |
| Frequency Response | 10Hz-20kHz |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
Provides instructions to maximize enjoyment and capabilities of the equipment for future reference.
Disassembling or altering the unit may lead to accident, fire or electric shock.
Keep small articles out of children's reach. If swallowed, consult a physician immediately.
Failure to use the correct ampere rating when replacing fuses may result in fire or electric shock.
Immediately stop use and contact dealer if any problem occurs, to prevent accident or injury.
Operating equipment or looking at screen while driving can distract the driver and cause accidents.
Keep volume at a level to hear outside noises. Driving unable to hear outside noises can cause accidents.
Using equipment for purposes other than stated may result in electric shock or injury.
Do not insert hands, fingers, or foreign objects in slots to avoid personal injury or equipment damage.
Do not mix new/old batteries. Insert with correct polarity to prevent fire or personal injury.
Blocking vents or radiator panels can cause heat buildup and may result in fire.
Stop the vehicle if unit operation might interfere with driving to prevent accidents.
Ensure vehicle temperature is between +60°C (+140°F) and -10°C (+14°F) before turning unit on.
Condensation may cause wavering CD playback sound. Remove disc and wait for moisture to evaporate.
Do not play cracked, warped, or damaged discs to avoid severely damaging the playback mechanism.
Do not attempt self-repair. Return unit to Alpine dealer or service station for servicing.
Do not grip or pull disc during auto-reloading. Do not insert disc when power is off.
Player accepts one disc at a time. Ensure label side faces up. Ejects incorrectly inserted discs.
Check new discs for bumps or irregularities before insertion to prevent loading issues.
Use only round shape discs. Special shape discs may cause damage to the mechanism.
Avoid locations with direct sun, heat, high humidity, excessive dust, or vibrations.
Do not expose the front panel to rain or water. Do not drop or apply shock to it.
Instructions for safely removing the front panel, including notes on panel heat and storage.
Align and push the front panel until it locks firmly into the main unit. Ensure terminals are clean.
Initialize the unit after installation by pressing the red reset button behind the front panel.
Press the PWR button to turn the unit on or off. Volume adjusts gradually to previous level.
Press and hold Eject for 3 seconds to toggle subwoofer On/Off. Initial mode is SUBW OFF.
Use MODE knob to adjust Volume, Bass, Treble, Balance, and Fader. Settings are memorized per source.
Set bass control center frequency at 60, 70, 80, or 100 Hz using INTLZ and UP/DN buttons.
Provides audible feedback with varying tones for button presses. Can be turned On or Off.
Change display lighting color between AMBER OFF (green) and AMBER ON (amber) using TUNE button.
Set DIM to AUTO to decrease illumination brightness when headlights are ON.
Press MUTE to lower volume by 20 dB. Press again to restore previous level.
Turn BBE mode on/off by pressing MODE for 2 seconds. Adjust level from +1 to +6.
Enable/disable mute mode for interrupt signals from connected devices using INTLZ and TUNE buttons.
Activate DEMO mode by holding DEMO button for 3 seconds. Exit by holding DEMO button again.
Turn Blackout mode on/off by holding BLACK OUT button for 2 seconds. Turns off display, enhances sound.
Press CLK button repeatedly to display the clock time. Toggles between modes: Normal, Clock Priority, Station Title.
Hold CLK for 3 seconds, then use MODE knob to adjust hours and minutes. Auto-sets after 5 seconds.
Use SOURCE, BAND, and TUNE buttons to manually tune radio stations. SEEK modes can be disabled.
Press TUNE to illuminate DX/SEEK. Use DN/UP to seek stations. Press TUNE again to return to local mode.
Tune to a station, press and hold a preset button (1-6) for 2 seconds to store it.
Press and hold A.ME for 2 seconds to automatically seek and store 6 strong stations.
Manually preset up to 6 stations from any band into the D.A.P. band using FUNC, D.A.P., and BAND buttons.
Press the 'F' button to return to normal mode. The FUNC indicator will turn off.
Select radio mode, band, then press preset button containing desired station. Display shows band, number, frequency.
Finds local stations while driving. Automatically searches for and stores up to 12 receivable stations.
Displays signal strength of received station during CD playback. Press T.RCL again to cancel.
Switch between mono/stereo for better reception. Press MONO to toggle mode.
Shows entered titles instead of frequency. Toggle display by pressing TITLE button.
Enter custom names for stations using TITLE and MODE buttons. Up to 8 characters can be entered.
Locates stations by their entered titles. Press T.S.M. to scan titles, use DN/UP to select.
Insert CD halfway, label side up. Player draws it in. Use eject button to remove CD.
Insert CD to play from first track. Press ►/II to pause playback. Press again to resume.
Skips to start of next/previous track. Use DN to return to track start, UP to advance.
Quickly move backward or forward through the track. Hold DN or UP buttons.
Repeats current track or all tracks. Press RPT to repeat track or RPT ALL for all tracks.
Plays tracks in random order. Indicator illuminates. Press M.I.X. again to cancel.
Plays first 10 seconds of each track. Press SCAN to activate Scan mode. Press SCAN again to stop.
Shows entered titles instead of frequency. Toggle display by pressing TITLE button.
Enter custom names for discs using TITLE and MODE buttons. Up to 8 characters can be entered.
Remove custom disc names. Select titling mode, hold TITLE for 3s. Hold SOURCE to scan/erase.
Connect and control optional 6/12-disc CD Shuttles via Ai-NET. Use SOURCE and BAND buttons for selection.
Selects between connected CD changers. Use SOURCE to activate shuttle mode, BAND to select.
Details functions of Mute, Power, Play/Pause, CD Changer, Band, and Volume buttons on the remote.
Selects stations in ascending order (Radio) or discs in ascending order (CD Shuttle).
Seeks stations downward (Radio) or returns to current track start (CD).
Seeks stations upward (Radio) or advances to next track start (CD).
Selects stations in descending order (Radio) or discs in descending order (CD Shuttle).
Activates external audio processor mode. Used with optional Ai-NET processor.
Selects the desired audio source for playback.
Use two AAA batteries. Slide cover to open, insert batteries observing polarity, push cover to close.
Do not drop discs, leave fingerprints, or affix labels. Do not write on the disc surface.
Wipe playing surface with a soft, clean cloth from center to edge. Use mild detergent for heavy soiling.
Avoid accessories that alter disc thickness/diameter, as they may cause operational problems.
Check ignition, power lead connections, and fuses. Reset button may resolve internal micro-computer issues.
Check antenna connection and cable. Replace if necessary. Ensure proper grounding and length.
Check for weak signal area, ensure DX mode. Check antenna grounding, length, and extension.
Check antenna length and grounding. Extend antenna fully; replace if broken.
Check operating temperature range. Allow vehicle interior to cool if unit is too hot.
Caused by moisture condensation in CD Module. Allow about 1 hour for moisture to evaporate.
Ensure no disc is loaded, eject if necessary. Insert CD correctly as per manual instructions.
Check if CD is damaged. Eject and discard damaged CDs to prevent mechanism damage.
Ensure unit is securely mounted. Clean disc if dirty. Replace disc if scratched.
Disc may be dirty or scratched. Clean disc; replace damaged discs.
Protective circuit activated due to high temperature. Indicator disappears when temperature returns to range.
Check shuttle, eject magazine, check indication. Reinsert magazine. Consult dealer if unable to eject.
Press magazine eject button. If magazine does not eject, consult your Alpine dealer.
Disc is jammed. Eject function may be needed. Insert empty magazine to receive disc.
No magazine loaded in the CD Shuttle. Insert a magazine.
Selected disc is not in place. Choose another disc.
Details FM/AM tuner and CD playback specifications including frequency response and sensitivity.
Provides specifications for remote control, general unit details, and physical dimensions.
