32-EN
Indication for XM Radio Mode
• The XM antenna is not connected to the XM radio module.
-Check whether the XM antenna cable is attached securely to
the XM radio module.
• Radio is being updated with latest encryption code.
-Wait until encryption code is being updated. Channels
0 and 1 should function normally.
• XM signal is too weak at the current location.
-Wait until the car reaches a location with a stronger signal.
• Radio is acquiring audio or program information.
-Wait until the radio has received the information.
• The channel currently selected has stopped broadcasting.
-Select another channel.
• The user has selected a Channel Number that does not exist or
is not subscribed to.
-The unit will revert back to the previously selected channel.
• There is no artist name/feature, song/program title, or
additional information associated with the channel at that time.
-No action needed.
ANTENNA
UPDATING
LOADING
NO SIGNL
OFF AIR
– – – –
Information
To Next Page
Loading...
Need help?
General
