19-EN
01GB05CDA-9883R.fm
ALPINE CDA-9883R 68-08564Z11-A (EN)
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
item, and then press / /ENT.
(e.g. Select SUBWOOFER)
BLUETOOTH IN*
1
FM-LEVEL RDS REGIONAL*
2
PI SEEK*
3
ALERT PTY31*
4
ILLUMINATION
LCD CONTRAST DIMMER SUBWOOFER
(SUBW. SYSTEM)*
5
PLAY MODE SCROLL TYPE
TEXT SCROLL INT MUTE*
6
AUX+ SETUP
AUX IN (AUX NAME)*
7
STEERING DIGITAL AUX
POWER IC LANGUAGE DEMO BLUETOOTH IN
*
1
Displayed only when INT MUTE is OFF.
*
2
Refer to “Receiving RDS Regional (Local) Stations” (page 9).
*
3
Refer to “PI SEEK Setting” (page 10).
*
4
Refer to “Setting PTY31 (Emergency Broadcast) reception”
(page 10).
*
5
Displayed only when SUBW is ON.
*
6
Displayed only when BLUETOOTH IN is OFF.
*
7
Displayed only when AUX is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW. ON or SUBW. OFF)
4
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
• Press AUDIO/RTN to return to the previous mode.
• If no operation is performed for 60 seconds, the SETUP mode will be
turned off automatically.
Setting the Bluetooth Connection
If an optional Bluetooth Box is connected, you can place a hands-free
call by a Bluetooth-equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth Box.
Set ADP when the Bluetooth Box is connected.
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press AUDIO/RTN repeatedly to
select the SUBWOOFER mode.
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Rotary encoder
AUDIO/RTN
SOURCE
/
//ENT
FUNC./SETUP
BAND/TA
BLUETOOTH IN
BT IN ADP / BT IN OFF (Initial setting)
Sound Customizing
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
SUBW. ON (Initial setting) / SUBW. OFF
SUBWOOFER BASS TREBLE BALANCE FADER
DEFEAT VOLUME SUBWOOFER
SUBW. SYS 1 (Initial setting) / SUBW. SYS 2
SUBW. SYS 1:Subwoofer level changes according to the main
volume setting.
SUBW. SYS 2:Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
01GB00CDA-9883R.book Page 19 Friday, November 17, 2006 8:25 PM
To Next Page
Loading...
