To Next PageTo Next Page
Need help?Do you have a question about the Alpine CDA-D852 and is the answer not in the manual?
General| Max Power Output | 50W x 4 |
|---|---|
| Tuner Type | AM/FM |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| USB Input | No |
| Bluetooth | No |
| Equalizer | Yes |
| Type | CD Receiver |
| Display Type | LCD |
| Channels | 4 |
| Remote Control | Yes |
| Detachable Faceplate | Yes |
| Anti-Theft Protection | Yes |
| Subwoofer Output | Yes |
| Signal-to-Noise Ratio | 105 dB |
| RCA Outputs | 3 pairs |
| DIN Size | 1-DIN |
| Preamp Outputs | 3 pairs (Front, Rear, Subwoofer) |
Warnings about disassembly, altering, and fuse usage to prevent electrical hazards.
Keep small articles away from children to prevent ingestion and potential harm.
Do not operate equipment while driving; maintain awareness of surroundings.
Keep volume moderate to hear outside noises while driving.
Use equipment only for its intended purpose and avoid inserting foreign objects.
Use correct battery polarity and avoid mixing old/new batteries.
Do not block vents to prevent heat buildup and potential fire.
Stop operation if it interferes with safe driving.
Operate within temperature limits and allow moisture to evaporate from discs.
Avoid damaged discs and seek professional maintenance for repairs.
Avoid specific disc operations like pulling during auto-reload or inserting when power is off.
Guidelines for inserting discs correctly, one at a time, label-side up.
Check new discs for imperfections that may cause jamming.
Use only round discs; special shapes may damage the mechanism.
Avoid installing in areas with extreme temperatures, humidity, dust, or vibrations.
Handle the detachable front panel with care, avoiding exposure to moisture or impact.
Troubleshooting steps for when the unit has no power or display.
Check power lead connections for proper operation.
Procedure for checking and replacing a blown fuse.
How to reset the unit if internal components malfunction due to noise.
Troubleshooting poor radio reception due to antenna or cable issues.
Troubleshooting seek mode tuning problems related to signal strength or antenna.
Troubleshooting noisy broadcasts related to antenna length or grounding.
Troubleshooting CD player/shuttle issues possibly due to temperature.
Addressing CD playback issues caused by moisture condensation.
Troubleshooting CD insertion issues like disc already loaded or improper insertion.
Troubleshooting CD playback issues related to damaged discs or improper handling.
Addressing CD skips caused by improper unit mounting or dirty discs.
Troubleshooting CD skips caused by dirty, scratched, or damaged discs.
Information on playing 3-inch CDs, with or without an adapter.
Troubleshooting HI TEMP indication on CD Shuttle due to high temperature.
Troubleshooting ERROR-01 indication for CD Shuttle malfunction.
Troubleshooting issues with ejecting the CD Shuttle magazine.
Troubleshooting ERROR-02 for a disc stuck inside the CD Shuttle.
Troubleshooting when no magazine is loaded into the CD Shuttle.
Troubleshooting when no disc is indicated or selected.
