Alpine CDE-154BT Owner's Manual

27-EN
Redialing a Number In Outgoing History
Previously dialled telephone numbers (Maximum 20 items) are stored in
dialled calls history. You can redial a number by searching from dialled
calls history.
 Setting item: DIALLED
Dialing a Number In Incoming History
Telephone numbers from received calls (Maximum 20 items) are stored
in the Received List. You can redial these numbers by searching here.
 Setting item: RECEIVED
Dialing a Number In Incoming Missed Call
History
Telephone numbers for received calls that are missed (Maximum 20
items), are stored in the Missed List. You can redial these numbers by
searching here.
 Setting item: MISSED
Dialing a Number In The Phone Book
Up to 1,000 names (at most 3 telephone numbers for each name) are
downloadable from a mobile phone. Dial a call by selecting a person
from the phone book list.
 Setting item: PHONE BOOK
Notes
• e order of the list display depends on the setting of “PB ORDER”
(refer to “Changing the Phone book List Order” on page 25).
• If the call history or phone book of the mobile phone is added or deleted
while it is connected to the unit, the list displayed on the unit may not
be brought up to date. If it is not updated, you cannot correctly place a
call.
• You can display the information of a number stored in phone book by
pressing VIEW. Each press changes the display as Name  Telephone
NO.  Telephone label
*
 Name
If the information can not be obtained, “NO NAME”, “NO NUMBER”
or “NO LABEL” will display.
* e telephone label of a number depends on the number information
stored in Phone book of the mobile phone, which includes 4
types-MOBILE, HOME, OFFICE, and OTHER.
Phone book alphabet search function
You can select the rst three letters to search for a desired name in
phone book list by using the Phone book alphabet search function.
For example:
Searching a name “Michael James”
e following example explains how the search is performed.
Depending on the setting in PB ORDER (refer to “Changing the Phone
book List Order” on page 25), the phone book is listed in rst name or
last name order. Please search for the rst name or last name according
to the setting.
1 Press BAND/SEARCH while in the phone book list, the
phone book alphabet search mode is activated.
The letter selection list is displayed.
2 Turn the Rotary encoder to select the rst letter (e.g. M),
and then press .
The letter selection list is displayed.
3 Turn the Rotary encoder to select the second letter (e.g. I),
and then press .
The letter selection list is displayed.
4 Turn the Rotary encoder to select the third letter (e.g. C),
and then press ENTER.
The names stored in phone book which begin with “MIC” are
searched.
5 Turn the Rotary encoder to select the desired name (e.g.
Michael James), and then press ENTER to make the
call.
Notes
• If the selected name has several numbers registered in phone book, you
need to turn the Rotary encoder to select the desired number, and
then press ENTER.
• Press  in step 3 or 4 to delete the current entry and return to the
previous step.
• You can search for a name by its rst letter, rst two letters or rst three
letters. Press ENTER aer entering the desired number of letters. A
list displays the names beginning with the entered letter(s).
3 Press ENTER.
The outgoing mode is activated, and each mode list is displayed.
Note
• It may take some time for the list to be displayed, and also directly aer
connection, the list may not be brought up to date.
4 Turn the Rotary encoder to select a name or a telephone
number from the list.
Note
• You can use Phone book alphabet search function to search a name or
number from Phone Book. For details, refer to “Phone book alphabet
search function” on page 27.
5 Press ENTER.
The selected telephone will be called.
If one name has several numbers registered in the telephone
book, press ENTER after selecting the name
*
, then turn the
Rotary encoder to choose the desired number and press
ENTER, the telephone will be called. Press and hold
ENTER for at least 2 seconds after selecting the name, the
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
* If the name cannot be recognized, default number will be
displayed.
Notes
• Press  to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
• If there is no content in DIALLED/RECEIVED/MISSED/PHONE
BOOK list, “----------” will be displayed for 2 seconds.
• If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.

Alpine CDE-154BT Specifications

General

Brand	Alpine
Model	CDE-154BT
Category	Car Receiver
Language	English