Alpine CDE-W203E User Manual

6-EN
01GB04CDEW203E.fm
ALPINE CDE-W203E 68-14470Z10-A (EN)
Accessory List
• Head unit ............................................................................1
• Power cable........................................................................1
• Mounting sleeve.................................................................1
• Bracket key.........................................................................2
• Face plate ...........................................................................1
• Screw (M5 × 8)....................................................................4
• Owner’s Manual .......................................................... 1 set
Turning Power On and Off
Press SOURCE/ to turn on the unit.
• The unit can be turned on by pressing any other button except /
CD.
Press and hold SOURCE/ for at least 2 seconds to
turn off the unit.
• The first time power is turned on, the volume will start from level 12.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1 Turn off the unit power.
2 Press RESET with a ballpoint pen or similar pointed
object.
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its
previous level.
Getting Started
SETUP
SOURCE/
/CD
Rotary encoder
MUTE
/ESC
/ENT
RESET switch
01GB00CDEW203E.book Page 6 Monday, November 10, 2008 11:11 AM

Alpine CDE-W203E Specifications

General

Brand	Alpine
Model	CDE-W203E
Category	Car Receiver
Language	English