Option Menu Setting
Note
Note
•
•
•
is function is available only when AUX SETUP is set to ON. For
details, refer to “Setting the AUX SETUP Mode” on page 17.
e option menu varies depending on the source.
If a USB Memory is directly connected to the USB terminal, the size or
shape may interfere with driving operations, therefore, avoid connecting
an AUX input terminal and a USB Memory at the same time.
You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
2
3
Press and hold
s
/ENTER/OPTION for at least 2 seconds to
activate the Option menu of the current source.
Turn the Rotary encoder to select the desired setting item,
and then press
s
/ENTER.
Turn the Rotary encoder to change the setting, and then
press
s
/ENTER.
After the setting, the display will return to the current source
automatically.
Setting item:
e
TUNER mode:
VOL LV ADJ
*1
DISC mode:
CD SET
*2
d
VOL LV ADJ
*1
USB mode:
VOL LV ADJ
*1
iPod mode:
IPOD CONT
*3
d
IPOD SET
*4
d
VOL LV ADJ
*1
AUX mode:
AUX SET
*5
d
VOL LV ADJ
*1
BT AUDIO mode (CDE-W235EBT only):
BT SET
*6
d
VOL LV ADJ
*1
Phone mode (Non-calling mode) (CDE-W235EBT only):
PHONE SET
*7
d
VOL LV ADJ
*8
Phone mode (Calling mode) (CDE-W235EBT only):
SPK SWITCH
*9
d
VOICE MUTE
*10
d
CALL WAIT
*11
d
CALL SOUND
*12
d
END CALL
*13
d
VOL LV ADJ
*8
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
*12
*13
You can individually emphasise or weaken the volume level of the
current source to create your own tonal preference. e setting values
in Option mode and in SETUP mode are linkage. Refer to “Setting the
Source Volume Level” on page 13.
PLAY MODE can be selected in this mode. For details, refer to
“Playing MP3/WMA Data (PLAY MODE)” on page 17.
Refer to “Setting the iPod Control” on page 26.
e setting items are the same as iPod setting in SETUP mode.
For details, refer to “iPod/iPhone Setting” on page 17.
AUX NAME can be selected in this mode. For details, refer to “Setting
the AUX NAME Mode” on page 17.
FW VERSION can be selected in this mode. You can see the current
rmware version about BLUETOOTH by using this setting.
CALL SOUND, SENDER ID, PB UPDATE, PB ORDER, AUTO ANS,
SEV NAME, SPEAKER SL and FW VERSION can be selected in this
mode. For details about these settings, refer to “BLUETOOTH SETUP”
on page 18.
e Hands free phone talk level, ring tone level and microphone gain
level can be adjusted by using this setting. e setting values in Option
mode and in SETUP mode are linkage. Refer to “Setting the Source
Volume Level” on page 13.
While calling, the call sound can be switched between the unit and
mobile phone by using this setting. is operation can also be done by
pressing BAND. Refer to “Call Switching Operation” on page 24.
While calling, and the Voice Mute is activated, the microphone input
will mute instantly and “VOICE MUTE” will blink. is operation can
also be done by pressing
q
. Refer to “Muting the microphone input
quickly (Voice Mute)” on page 23.
If there is a waiting call, select this item to display the caller’s Name and
waiting number (1 or 2). Press VIEW and the display will switch.
Refer to “Setting the BLUETOOTH sound quality” on page 20.
Select this item to hang up the call.
15
-EN
To Next Page
Loading...
Need help?
General
