Alpine i209-WRA - Connection of HCE-TCAM1-WRA; Rear View Camera Wiring; Connection of an External Amplifier; Subwoofer Output Connections

Jeep Wrangler
WRANGLER  18/22
Remote Turn-On Lead (Blue/White)
Subwoofer RCA Connectors
Front Output RCA Connectors
Rear Output RCA Connectors
RCA Extension Cable (sold separately)
(Blue/White)
REMOTE ON
(Blue/White)
Subwoofer
REMOTE
Amplier for subwoofer
(sold separately)
To subwoofer input terminal
(Red)
(White)
SUBW
FRONT OUT
REAR OUT
To front input terminal
Amplier 4 ch
(sold separately)
To rear input terminal
Front speaker
Rear speaker
REMOTE ON
(Blue/White)
(Red)
(White)
(Red)
(White)
CAN I/F
GPS
USB
W.REMOTE POWER
SXM/DAB
PRE OUT
HDMI IN HDMI OUT
ANTENNA
Connection Of An External Amplifier
Connection Of HCE-TCAM1-WRA
To HCE-TCAM1-WRA
CAN I/F
GPS
USB
EXT. KEY
SXM/DAB
PRE OUT
ANTENNA
Direct Camera Input
Direct Camera Adapter
i209D Source Unit
Rear View Camera
6-pin Black Connector
Main Harness
Rear View Camera
WARNING!
The use of this connection
is intended for Alpine
HCE-TCAM1-WRA rear
view camera ONLY.
To HCE-TCAM1-WRA
This connection goes to
the direct video input of
the head unit through the
adapter. If you do not make
this connection there will be
no video to your i209-WRA
This connection goes to
the camera connector on
the main harness. This
handles the power, ground,
reverse light, and illumination
connections.
i209D - Display
i209-WRA Source Unit