23-EN
∗ If you set the air conditioner, etc., while the Climate screen
is displayed, the screen will continuously be displayed.
Setting the Parking Sensor Interrupt
On/Off
Set to [On] to display the Parking Assist screen if a vehicle
detects an obstacle.
Setting item:
Parking sensor interrupt
Touch [ ] (Off) or [ ] (On) of “Parking
sensor interrupt”.
Dash Cam (Drive Recorder) Setup
[Dash Cam] is selected on the Function Setup Menu screen.
Display the Driver Recorder Menu
Set to [On] when the optional driver recorder is connected.
Setting item:
Driver Recorder Menu
Touch [ ] (Off) or [ ] (On) of “Driver
Recorder Menu”.
Video Setup
Setting item:
Video Setup
Touch [ ] or [ ] of “Brightness, Colour,
Contrast” to set the picture quality.
• Available only when “Driver Recorder Menu” setting is [On]
(page 23).
Adjusting Brightness
Setting item:
Brightness
Setting contents:
-15 to +15 (Initial setting: 0)
Adjusting Colour of Picture
Setting item:
Colour
Setting contents:
0 to 2 (Initial setting: 0)
Adjusting Image Contrast
Setting item:
Contrast
Setting contents:
-15 to +15 (Initial setting: 0)
Camera Setup
[Camera] is selected on the Function Setup Menu screen.
Setting the Reverse Camera
(Camera 1)
Set to [On] when the optional reverse camera is connected.
Setting item:
Reverse Camera (Camera 1)
Touch [ ] (Off) or [ ] (On) of “Reverse
Camera (Camera 1)”.
• “Reverse Camera (Camera 1)” is not available when the
Camera Setup screen is displayed using [Setup] of the
Camera screen.
Reverse Camera Signal Input Setting
When “Reverse Camera (Camera 1)” setting is [On], the
video input signal type can be chosen.
Setting item:
Reverse Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
To Next Page
Loading...
